Compacte Professionele Kapmachine / Precision Stone Chopping machine

Uitverkocht
€ 400,00 € 350,00

Let op: Showroommodel! Derhalve afgeprijsd. Laatste exemplaar.

Deze Precision Stone Chopping Machine is een professionele kapmachine voor het kappen van o.a. marmer, steen, corian, porselein, dik glas en dubbelgebakken buiten/vloertegels.
De machine is zo gebouwd dat het veel minder kracht kost om de diverse soorten harde materialen te kappen of te snijden dan met het gebruikelijke handgereedschap.

De machine is zeer compact en werkt het beste wanneer je hem aan een werkoppervlak vastschroeft.
Je kunt hem ook bevestigen aan een plankje van hout of multiplex, zo blijft hij makkelijk te verplaatsen. 

- De maximale dikte die de machine kan snijden is 12 mm
- inclusief schroeven om aan werkblad of plank te bevestigen
- 2 snijbladen, onderling verwisselbaar 
- gewicht ca 4 kg
- totale breedte na plaatsing van uiteinden aan de hendel 23 cm

***

Attention: Last one!!

This Precision Stone Chopping Machine is a professional cutting system for making precision cuts in marble mosaic tile and hard porcelain. The machine’s upper blade is lowered by a screw mechanism that requires much less effort than handheld cutting tools, and cuts are made smoothly and efficiently. The cutting bed is graduated with guidelines and an adjustable stop for cutting pieces with exact measurement. The maximum thickness the machine can cut is 12mm (1/2 inch).

The cutting blades that come with the machine work very well for most all types of marble, stone, glass rods en corian (artificial stone which is very hard).

The upper and lower blades are identical and interchangeable.

The machine is a benchtop device that works best when you bolt it to a work surface, but a small piece of plywood or board can be used instead to make a mobile unit that can easily transported from site to site. A common C-clamp can also be used if you want to quickly move the machine between different work tables.

Precision Stone Chopping Machine

  • maximum thickness that can be cut: 12mm (1/2 inch)
  • screw mechanism for smooth, efficient cuts.
  • comes with 2 replaceable blades.
  • upper and lower blades are identical and interchangeable.
  • 2 mounting holes in base for bolting to work surface
  • weight: 8 lbs 4 oz (4kg)
  • width of turning handles after attaching knobs: 9.5 inches (23cm)

Safety and Cutting Tile

The smooth, efficient cuts made by this machine are MUCH safer than those made by handheld nippers, which snap when they cut and send pieces flying all the time. With these machines, you shouldn’t have pieces flying at all, or at least very rarely. That being said, you should still observe the basic safety rules for using a compressive cutting tools:

  • Always wear safety glasses with side shields when cutting.
  • Make sure that you don’t cut tile around people who are not wearing safety glasses. Flying chips could potentially hit their eyes as easily as yours.
  • Be aware that cutting tile of any type can produce sharp edges.
  • Crumbs from cutting can be extremely sharp. Never sweep off a work surface with your bare hand. Use a vacuum or counter brush.